Growth and Seed Yield of Asalio (Lepidium Sativum L.) as Influenced by Seed Rates and Sowing Methods

Chundawat R.S., Patidar D.K., Haldar A., Meena K.C

College of Horticulture, Rajmata Vijayaraje Scindia Krishi Vishwa Vidyalaya (RVSKVV), Gwalior, Madhya Pradesh, India.

DOI : http://dx.doi.org/10.12944/CARJ.5.3.04

Article Publishing History

Received: 11 July 2017
Accepted: 02 November 2017

Review Details

Plagiarism Check: Yes

Article Metrics

Views     PDF Download PDF Downloads: 1485

Google Scholar

Abstract:

The experiments were carried out during Rabi season for the three consecutive years of (2012 to 2014) at the Research Farm, College of Horticulture, Mandsaur (M.P.) under AICRP on M&AP, Rajmata Vijayaraje Scindia Krishi Vishwa Vidyalaya, Gwalior (M.P.). The treatments consisted of two sowing methods as M1- seed broad casting and M2- line sowing. Five seed rate S1- 6, S2-8, S3- 10, S4-12 and S5-15 kg/ha. These treatments were evaluated in Factorial Randomized Block Design with three replications. Significantly maximum plant height was recorded under treatment S5, maximum number of number of branches was recorded under treatment S2, maximum stem girth was recorded under treatment S2 and seed yield was recorded under treatment S2.

Keywords:

Asalio, Lepidium; Seed Rate and Sowing Methods

Download this article as: 

Copy the following to cite this article:

Chundawat R.S., Patidar D.K., Haldar A. and Meena K.C. Growth and Seed Yield of Asalio (Lepidium Sativum L.) as Influenced by Seed Rates and Sowing Methods. Curr Agri Res 2017;5(3). doi : http://dx.doi.org/10.12944/CARJ.5.3.04

Copy the following to cite this URL:

Chundawat R.S., Patidar D.K., Haldar A. and Meena K.C. Growth and Seed Yield of Asalio (Lepidium Sativum L.) as Influenced by Seed Rates and Sowing Methods. Curr Agri Res 2017;5(3). Available from: http://www.agriculturejournal.org/?p=2877


Introduction

Asalio is a polymorphous species, also known popularly as Garden cress and is believed to have originated primarily in the high land region of Ethiopia and Eritrea. Garden cress (Lepidium sativum L.) is an erect annual edible herb belonging to the family Cruciferae. In India, it is grown mainly in Madhya Pradesh, Rajasthan, Gujarat, Uttar Pradesh and Maharashtra in an area of about 5000 hectare.1 Apart from India, it is also cultivated in North America and parts of Europe.2

Analysis of Garden cress seed has the following nutrient and phytochemical values moisture (5.69%), protein (23.5%), fat (15.91%), ash (5.7%), phosphorus (P2O5) (1.65%), calcium (0.31%) and sulphur (0.9%). The seeds contain alkaloid (0.19%), glucotropaeolin, sinapin (choline ester of sinapic acid), sinapic acid (4 hydroxy-3:5-dimethoxycinnamic acid, C11H12O5, m.p. 192°C), mucilaginous matter (5%) and uric acid (0.108 g/kg). On steam distillation, it yields a volatile oil similar to that from the herb. The oil has pronounced estrogen activity, test on immature rats receiving 3 to 4 drops of the oil with the diet consistently show better development and higher weights of the ovaries than control animals and exhibited several hemorrhagic of follicles in the ovaries.3

The seed mucilage is known as cress seed mucilage, which is used as a substitute for Arabica gum. The seeds are used for increasing milk yield in animals and human beings. They are beneficial in promoting digestion and growth in children. Seed oil is externally used in rheumatism. The extracts of seed have hypotensive effect with transient respiratory stimulation. They are boiled with milk and are used to induce abortion.4 Fresh leaves and young seedlings are mainly used as spice and are rich source of glucosinolates5 and also used as salads. Roots are bitter, acrid and are useful in treatment of secondary syphilis.

Due to its diversified uses, demand and popularity, cultivation of garden cress is increasing on a commercial scale.

Material and Methods

The experiments were carried out during Rabi season of 2011-12 to 2013-14 at the Research Farm, College of Horticulture, Mandsaur (M.P.) under All India Coordinated Research Project on Medicinal and Aromatic Plants, Rajmata Vijayaraje Scindia Krishi Vishwa Vidyalaya, Gwalior (M.P.). Geographically Mandsaur is situated in Western part of Madhya Pradesh between latitude of 23o45to 24o13N and longitude of 74º 44’ to 75º 18’ E at an altitude of 435.2 Meter above Mean Sea Level (MSL). This region falls under Malwa Plateau (10th agro climatic zone of the state) and enjoys the sub-tropical and semi arid climate with the maximum temperature of about 43 – 45ºC in summer and minimum temperature 5ºC in winter. The annual rainfall is 544.05 mm most of which is from 20th June to end of September. Dry spell is a common feature due to uneven distribution of rainfall. The soil of experimental field was medium black clay in texture with uniform topography. The treatments consisted of the two sowing method M1– seed broad casting and M2– line sowing. Five seed rate S1– 6, S2-8, S3-10, S4-12 and S5-15 kg/ha. These treatments were sown in Factorial Randomized Block Design with three replications and three years data analyzed statistically. Observations were recorded under investigation i.e. plant height, number of branches, stem girth and seed yield. Three years data are depicted in table 1. All the above mentioned observations were recorded from five plants were randomly selected from each treatment for determining various growth and yield parameters. The plant height was measured from ground level to the tip of the main branch. The height of the plant was recorded at the time of maturity. Primary branches were recorded by counting the number of branches arising from the main central stem of plant at the time of maturity. Stem girth was measured by digital vernier caliper from individual plant at maturity. Seed yield was recorded by weighing the clean seed of harvested siliqua from individual sample and converted in q/ha.

Results and Discussion

Yield and yield attributes were significantly influenced by seed rate and sowing methods.  The seed rates were more effective than sowing method of L. sativum. On the basis of three years mean data (Table 1), it was observed that the plant height found to be significant. The highest (112.17 cm) plant height was recorded in S5, followed by S4 (100.83 cm), S3 (90.17 cm) and S2 (80.17 cm) and lowest in S1 (75.17 cm) as affected due to seed rate. The effect of methods of sowing and interaction were found to be non significant. This might be due to the competition of solar energy coupled with shallow root system. Increased plant density limits the availability of space for lateral growth resulting in increased plant height and hence root configuration affecting the crop growth. These findings were in agreement with6 in radish,7 in cauliflower and8 in Chinese cabbage.

Number of branches per plant significantly increased with seed rates however, the maximum (18.00) number of branches were recorded in S2, followed by S1 (17.00), S3 (12.67) and S4 (10.50) while lowest in S5 (8.83). The results of methods of sowing and interaction were found to be non significant, which can be attributed to fact that, in wider spacing or lower plant density the individual plant get plenty of light and more nutrients in comparison to higher plant density. The results of present study were also confirmed by the findings of9 in cauliflower and10 in cabbage. This was due to smaller space among plants in broadcast resulting in higher competition for nutrients; while in row sowing there was wider space and thus relatively less plant competition for nutrients.11 Also,12 reported taller and more branched plants at the lower plant densities of Sesame. The variability among treatments for primary branches may be due to availability of moisture and nutrients. Closely spaced plants might have faced competition for resources.13 Observed few branches per plant grown at highest densities. Thus, our findings are in line with them.

Seed rates were significantly influenced stem girth as compared to sowing methods. The highest stem girth was recorded in S2 (8.70 mm) followed by S1 (8.52 mm), S3 (5.65 mm) and S4 (5.17 mm) and were lowest in S5 (4.70 mm). Under sowing methods, the stem girth was higher (6.74 mm.) in line sowing method over broad costing. This increase in plant growth and yield may be attributed to optimum thermal environment, consequent to increased dry matter production, higher dry matter accumulation, higher leaf area index and higher translocation of food material for the formation of seed during October month, thus influencing better response in Lepidium sativum.14

The seed yield was significantly differing among the treatments. However, the highest seed yield was recorded in S2 (20.10 q/ha) followed by S1 (19.07), S3 (13.67) and S4 (12.30) and it was lowest in S5 (11.43 q/ha) due to seed rate. Under the sowing methods, the highest seed yield was recorded in M1 (16.3). The interaction were found to be non significant. The beneficial effect of less seed rate in seed yield has been due to better light penetration and higher photosynthetic efficiency resulting in development of plant canopy with more number of pods/plant and seed/plant.15 The second important factor is to provide non-competitive space between the plants as higher plant density adversely affect the growth and development and on the other hand, higher yield per plant obtained under wider spacing may not compensate the yield at optimum plant population.15

Table 1: Effect of seed rates and sowing methods on the growth parameters and seed yield of Asalio.

Treatments 

Plant height (cm plant-1)

No. of branches (plant-1)

Stem girth (mm plant-1)

Seed yield (q ha-1)

Year

Mean

Year

Mean

Year

Mean

Year

Mean

2012

2013

2014

2012

2013

2014

2012

2013

2014

2012

2013

2014

Seed Rates (kg ha-1)
S1-6

76.50

76.50

72.50

75.17

18.60

17.00

15.50

17.03

9.40

8.25

7.90

8.52

20.00

19.00

18.20

19.07

S2-8

82.50

81.00

77.00

80.17

19.50

18.00

16.50

18.00

9.40

8.60

8.10

8.70

20.80

20.00

19.50

20.10

S 3-10

98.50

88.50

83.50

90.17

13.50

13.00

11.50

12.67

6.00

5.75

5.20

5.65

14.00

14.00

13.00

13.67

S 4-12

112.50

98.00

92.00

100.83

11.00

11.00

9.50

10.50

5.40

5.10

5.00

5.17

13.20

12.00

11.70

12.30

S5-15

119.00

112.50

105.00

112.17

10.00

9.00

7.50

8.83

4.80

5.15

4.30

4.75

12.00

11.30

11.00

11.43

SEm±

7.05

3.27

2.21

1.59

0.99

0.62

0.52

0.60

0.32

1.55

1.11

0.78

CD at 5%

14.10

6.87

4.66

4.53

2.10

1.31

1.50

1.26

0.68

4.52

2.33

1.64

Sowing Methods
M1

97.20

89.40

83.80

90.13

15.20

14.60

12.60

14.13

7.50

6.74

6.20

6.81

16.60

16.30

15.58

16.16

M2

98.50

93.20

88.20

93.30

13.80

12.60

11.60

12.67

6.50

6.40

5.80

6.23

15.40

14.20

13.80

14.47

SEm±

4.45

2.06

1.40

1.00

0.63

0.39

0.33

0.38

0.20

0.98

0.70

0.50

CD at  5%

9.37

4.34

NS

2.98

1.32

NS

0.91

0.79

NS

2.72

1.47

NS

M1-Seed Broad casting and M2-Line Sowing

Conclusion

Lepidium sativum L. is an erect annual edible herb and polymorphous species is belonging to the family Cruciferae. From the above investigation it could be concluded that 8 kg seed rate with broad costing  has shown better performance amongst all others seed rate and sowing methods. However, this combination has significantly influenced the number of branches, stem girth and seed yield except plant height.

Acknowledgments

The authors wish to thanks to AICRP on Medicinal and Aromatic Plants, ICAR, New Delhi for financial support as well as providing laboratory facility at the division during course of this investigation. This manuscript is a part of research programme under AICRP on Medicinal and Aromatic Plants.

References

  1. Choudhari, S., Keshwa, G. L. and Yadav, L. R. Effect of sowing dates, row spacing and nitrogen levels on productivity, quality and economics of garden cress (Lepidium sativum L.). Indian J. Agri. Sci. 2010;80(8):754-761.
  2. Gokavi, S. S., N. G. Malleshi and Guo, M. R. Chemical composition of garden cress (Lepidium sativum L.) seeds and its fractions and use of bran as functional ingredient. Plant Foods for Human Nutrition. 2004;59:15-16.
    CrossRef
  3. Anonymous. The Wealth of India–A Dictionary of Indian Raw Materials and Industrial Products. Council of Scientific and Industrial Research. New Delhi. 1962;6:70-73.
  4. Chopra, R. N. Glossary of Indian Medicinal Plants. ISIR, New Delhi. 1986.
  5. Gil, V. and Macleod, A. J. Studies on glucosinolate degradation in Lepidium sativum L. seed extract. Phytochem. 1980;19:1369-1374.
    CrossRef
  6. Rastogi, K. B., Sharma, P. P. and Korla, B. N.  Effect of different levels of nitrogen and spacing on seed yield of radish (Raphanus sativus L.) Vegetable Science. 1987;14:105–109.
  7. Khurana, D. S., Singh, H., Singh, J. and Cheema, D. S. Effect of N, P and plant population on yield and its components in cauliflower. Indian J. Horti. 1990;47(1):70–74.
  8. Hill, T. R. Effect of plant spacing and nitrogenous fertilizers on the yield of Chinese cabbage (Brassica campestris sp. Pekinensis). Australian J. Experi. Agri. 2000;30(3):437–439.
    CrossRef
  9. Sharma D K and Chaudhary D R. Time of sowing and plant density on growth and curd yield in early cauliflower (Brassica oleracea L. var. botrytis) cv. Early Kunwari. Vegetable Science. 1996;23(2):141–144.
  10. Purushottam, P. K. Plant spacing: a key husbandry practice for rainy season cabbage production. Nepal Agri. Res. J. 2001;4(5):48–55.
  11. Henderson, T.L., Johnson, B.L., Schneiter, A. A. New crops row spacing, plant population, and cultivar effects on grain amaranth in the Northern Great Plains. Agron. J. 2000;92:329-336.
    CrossRef
  12. Caliskan Sevgi, Mehmet Arslan , Halis Arioglu and Necmi Isler. Effect of Planting Method and Plant Population on Growth and Yield of Sesame (Sesamum indicum L.) in a Mediterranean Type of Environment. Asian Journal of Plant Sciences. 2004;3:610-613.
    CrossRef
  13. Angadi, S. V., Cutforth, H. W., McConkey, B. G. and Gan, Y. Yield adjustment by canola grown at different plant populations under semiarid conditions. Crop Sci. 2003;43:1358-1366.
    CrossRef
  14. Yadav, R., Choudhary, S., Keshwa, G. L. and Sharma, O. P. Garden cress (Lepidium sativum) growth, productivity and nutrient uptake under different sowing dates, row spacing and nitrogen levels. Indian J. Agron. 2013;58(1):114-118.
  15. Elithung, B. Odyuo. Studies on development of cultural practices of (Lepidium sativum L.). PG Thesis, College of Forestry Dr Yashwant Singh Parmar University of Horticulture and Forestry, Nauni Solan-173230 (H P)India. 2014.
scroll to top